Logo Search packages:      
Sourcecode: nmap version File versions  Download package

setup.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-
 
# ***********************IMPORTANT NMAP LICENSE TERMS************************
# *                                                                         *
# * The Nmap Security Scanner is (C) 1996-2009 Insecure.Com LLC. Nmap is    *
# * also a registered trademark of Insecure.Com LLC.  This program is free  *
# * software; you may redistribute and/or modify it under the terms of the  *
# * GNU General Public License as published by the Free Software            *
# * Foundation; Version 2 with the clarifications and exceptions described  *
# * below.  This guarantees your right to use, modify, and redistribute     *
# * this software under certain conditions.  If you wish to embed Nmap      *
# * technology into proprietary software, we sell alternative licenses      *
# * (contact sales@insecure.com).  Dozens of software vendors already       *
# * license Nmap technology such as host discovery, port scanning, OS       *
# * detection, and version detection.                                       *
# *                                                                         *
# * Note that the GPL places important restrictions on "derived works", yet *
# * it does not provide a detailed definition of that term.  To avoid       *
# * misunderstandings, we consider an application to constitute a           *
# * "derivative work" for the purpose of this license if it does any of the *
# * following:                                                              *
# * o Integrates source code from Nmap                                      *
# * o Reads or includes Nmap copyrighted data files, such as                *
# *   nmap-os-db or nmap-service-probes.                                    *
# * o Executes Nmap and parses the results (as opposed to typical shell or  *
# *   execution-menu apps, which simply display raw Nmap output and so are  *
# *   not derivative works.)                                                * 
# * o Integrates/includes/aggregates Nmap into a proprietary executable     *
# *   installer, such as those produced by InstallShield.                   *
# * o Links to a library or executes a program that does any of the above   *
# *                                                                         *
# * The term "Nmap" should be taken to also include any portions or derived *
# * works of Nmap.  This list is not exclusive, but is meant to clarify our *
# * interpretation of derived works with some common examples.  Our         *
# * interpretation applies only to Nmap--we don't speak for other people's  *
# * GPL works.                                                              *
# *                                                                         *
# * If you have any questions about the GPL licensing restrictions on using *
# * Nmap in non-GPL works, we would be happy to help.  As mentioned above,  *
# * we also offer alternative license to integrate Nmap into proprietary    *
# * applications and appliances.  These contracts have been sold to dozens  *
# * of software vendors, and generally include a perpetual license as well  *
# * as providing for priority support and updates as well as helping to     *
# * fund the continued development of Nmap technology.  Please email        *
# * sales@insecure.com for further information.                             *
# *                                                                         *
# * As a special exception to the GPL terms, Insecure.Com LLC grants        *
# * permission to link the code of this program with any version of the     *
# * OpenSSL library which is distributed under a license identical to that  *
# * listed in the included COPYING.OpenSSL file, and distribute linked      *
# * combinations including the two. You must obey the GNU GPL in all        *
# * respects for all of the code used other than OpenSSL.  If you modify    *
# * this file, you may extend this exception to your version of the file,   *
# * but you are not obligated to do so.                                     *
# *                                                                         *
# * If you received these files with a written license agreement or         *
# * contract stating terms other than the terms above, then that            *
# * alternative license agreement takes precedence over these comments.     *
# *                                                                         *
# * Source is provided to this software because we believe users have a     *
# * right to know exactly what a program is going to do before they run it. *
# * This also allows you to audit the software for security holes (none     *
# * have been found so far).                                                *
# *                                                                         *
# * Source code also allows you to port Nmap to new platforms, fix bugs,    *
# * and add new features.  You are highly encouraged to send your changes   *
# * to nmap-dev@insecure.org for possible incorporation into the main       *
# * distribution.  By sending these changes to Fyodor or one of the         *
# * Insecure.Org development mailing lists, it is assumed that you are      *
# * offering the Nmap Project (Insecure.Com LLC) the unlimited,             *
# * non-exclusive right to reuse, modify, and relicense the code.  Nmap     *
# * will always be available Open Source, but this is important because the *
# * inability to relicense code has caused devastating problems for other   *
# * Free Software projects (such as KDE and NASM).  We also occasionally    *
# * relicense the code to third parties as discussed above.  If you wish to *
# * specify special license conditions of your contributions, just say so   *
# * when you send them.                                                     *
# *                                                                         *
# * This program is distributed in the hope that it will be useful, but     *
# * WITHOUT ANY WARRANTY; without even the implied warranty of              *
# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       *
# * General Public License v2.0 for more details at                         *
# * http://www.gnu.org/licenses/gpl-2.0.html , or in the COPYING file       *
# * included with Nmap.                                                     *
# *                                                                         *
# ***************************************************************************/

import errno
import sys
import os
import os.path
import re

import distutils.sysconfig
from distutils import log
from distutils.core import setup, Command
from distutils.command.install import install

from glob import glob
from stat import *

from zenmapCore.Version import VERSION
from zenmapCore.Name import APP_NAME, APP_DISPLAY_NAME, APP_WEB_SITE, APP_DOWNLOAD_SITE, NMAP_DISPLAY_NAME

# The name of the file used to record the list of installed files, so that the
# uninstall command can remove them.
INSTALLED_FILES_NAME = "INSTALLED_FILES"

# Directories for POSIX operating systems
# These are created after a "install" or "py2exe" command
# These directories are relative to the installation or dist directory
data_dir = os.path.join('share', APP_NAME)
pixmaps_dir = os.path.join(data_dir, 'pixmaps')
locale_dir = os.path.join(data_dir, 'locale')
config_dir = os.path.join(data_dir, 'config')
docs_dir = os.path.join(data_dir, 'docs')
misc_dir = os.path.join(data_dir, 'misc')

# Where to install .desktop files.
desktop_dir = os.path.join('share', 'applications')

def mo_find(result, dirname, fnames):
    files = []
    for f in fnames:
        p = os.path.join(dirname, f)
        if os.path.isfile(p) and f.endswith(".mo"):
            files.append(p)
        
    if files:
        result.append((dirname, files))

################################################################################
# Installation variables

data_files = [ (pixmaps_dir, glob(os.path.join(pixmaps_dir, '*.gif')) +
                             glob(os.path.join(pixmaps_dir, '*.png'))),

               (os.path.join(pixmaps_dir, "radialnet"),
                             glob(os.path.join(pixmaps_dir, "radialnet", '*.png'))),

               (config_dir, [os.path.join(config_dir, APP_NAME + '.conf')] +
                            [os.path.join(config_dir, 'scan_profile.usp')] +
                            [os.path.join(config_dir, APP_NAME + '_version')]),

               (misc_dir, glob(os.path.join(misc_dir, '*.xml'))), 

               (docs_dir, [os.path.join(docs_dir, 'help.html')])]

# Add i18n files to data_files list
os.path.walk(locale_dir, mo_find, data_files)

# path_startswith and path_strip_prefix are used to deal with the installation
# root (--root option, also known as DESTDIR).

def path_startswith(path, prefix):
    """Returns True if path starts with prefix. It's a little more intelligent
    than str.startswith because it normalizes the paths to remove multiple
    directory separators and down-up traversals."""
    path = os.path.normpath(path)
    prefix = os.path.normpath(prefix)
    return path.startswith(prefix)

def path_strip_prefix(path, prefix):
    """Return path stripped of its directory prefix if it starts with prefix,
    otherwise return path unmodified. This only works correctly with Unix paths;
    for example it will not replace the drive letter on a Windows path.
    Examples:
    >>> path_strip_prefix('/tmp/destdir/usr/bin', '/tmp/destdir')
    '/usr/bin'
    >>> path_strip_prefix('/tmp/../tmp/destdir/usr/bin', '/tmp///destdir')
    '/usr/bin'
    >>> path_strip_prefix('/etc', '/tmp/destdir')
    '/etc'
    >>> path_strip_prefix('/etc', '/')
    '/etc'
    >>> path_strip_prefix('/etc', '')
    '/etc'
    """
    absolute = os.path.isabs(path)
    path = os.path.normpath(path)
    prefix = os.path.normpath(prefix)
    if path.startswith(prefix) and prefix != os.sep:
        path = path[len(prefix):]
    # Absolute paths must remain absolute and relative paths must remain
    # relative.
    assert os.path.isabs(path) == absolute
    return path

################################################################################
# Distutils subclasses

class my_install(install):
    def finalize_options(self):
      # Ubuntu's python2.6-2.6.4-0ubuntu3 package changes sys.prefix in
        # install.finalize_options when sys.prefix is "/usr/local" (our
        # default). Because we need the unchanged value later, remember it here.
        self.saved_prefix = self.prefix
        install.finalize_options(self)

    def run(self):
        install.run(self)

        self.set_perms()
        self.set_modules_path()
        self.fix_paths()
        self.create_uninstaller()
        self.write_installed_files()

    def get_installed_files(self):
        """Return a list of installed files and directories, each prefixed with
        the installation root if given. The list of installed directories
        doesn't come from distutils so it may be incomplete."""
        installed_files = self.get_outputs()
        for package in self.distribution.packages:
            dir = package.replace(".", "/")
            installed_files.append(os.path.join(self.install_lib, dir))
        # Recursively include all the directories in data_dir (share/zenmap).
        # This is mainly for convenience in listing locale directories.
        installed_files.append(os.path.join(self.install_data, data_dir))
        for dirpath, dirs, files in os.walk(os.path.join(self.install_data, data_dir)):
            for dir in dirs:
                installed_files.append(os.path.join(dirpath, dir))
        installed_files.append(os.path.join(self.install_scripts, "uninstall_" + APP_NAME))
        return installed_files

    def create_uninstaller(self):
        uninstaller_filename = os.path.join(self.install_scripts, "uninstall_" + APP_NAME)

        uninstaller = """\
#!/usr/bin/env python
import errno, os, os.path, sys

print 'Uninstall %(name)s %(version)s'

answer = raw_input('Are you sure that you want to uninstall %(name)s %(version)s? (yes/no) ')

if answer != 'yes' and answer != 'y':
    print 'Not uninstalling.'
    sys.exit(0)

""" % {'name':APP_DISPLAY_NAME, 'version':VERSION}

        installed_files = []
        for output in self.get_installed_files():
            if self.root is not None:
                # If we have a root (DESTDIR), we need to strip it off the front
                # of paths so the uninstaller runs on the target host. The path
                # manipulations are tricky, but made easier because the
                # uninstaller only has to run on Unix.
                if not path_startswith(output, self.root):
                    # This should never happen (everything gets installed inside
                    # the root), but if it does, be safe and don't delete
                    # anything.
                    uninstaller += "print '%s was not installed inside the root %s; skipping.'\n" % (output, self.root)
                    continue
                output = path_strip_prefix(output, self.root)
                assert os.path.isabs(output)
            installed_files.append(output)

        uninstaller += """\
INSTALLED_FILES = (
"""
        for file in installed_files:
            uninstaller += "    %s,\n" % repr(file)
        uninstaller += """\
)

# Split the list into lists of files and directories.
files = []
dirs = []
for path in INSTALLED_FILES:
    if os.path.isfile(path) or os.path.islink(path):
        files.append(path)
    elif os.path.isdir(path):
        dirs.append(path)
# Delete the files.
for file in files:
    print "Removing '%s'." % file
    try:
        os.remove(file)
    except OSError, e:
        print >> sys.stderr, '  Error: %s.' % str(e)
# Delete the directories. First reverse-sort the normalized paths by
# length so that child directories are deleted before their parents.
dirs = [os.path.normpath(dir) for dir in dirs]
dirs.sort(key = len, reverse = True)
for dir in dirs:
    try:
        print "Removing the directory '%s'." % dir
        os.rmdir(dir)
    except OSError, e:
        if e.errno == errno.ENOTEMPTY:
            print "Directory '%s' not empty; not removing." % dir
        else:
            print >> sys.stderr, str(e)
"""

        uninstaller_file = open(uninstaller_filename, 'w')
        uninstaller_file.write(uninstaller)
        uninstaller_file.close()

        # Set exec bit for uninstaller
        mode = ((os.stat(uninstaller_filename)[ST_MODE]) | 0555) & 07777
        os.chmod(uninstaller_filename, mode)

    def set_modules_path(self):
        app_file_name = os.path.join(self.install_scripts, APP_NAME)
        # Find where the modules are installed. distutils will put them in
        # self.install_lib, but that path can contain the root (DESTDIR), so we
        # must strip it off if necessary.
        modules = self.install_lib
        if self.root is not None:
            modules = path_strip_prefix(modules, self.root)

        ufile = open(app_file_name, "r")
        ucontent = ufile.readlines()
        ufile.close()

      # Insert our custom import after the first non-comment line.
        re_sys = re.compile("^#")
        uline = 0
        for line in ucontent:
            if not re_sys.match(line):
                break
            uline += 1
        ucontent.insert(uline, "\nimport sys\nsys.path.append(%s)\n" % repr(modules))

        ufile = open(app_file_name, "w")
        ufile.writelines(ucontent)
        ufile.close()

    def set_perms(self):
        re_bin = re.compile("(bin|\.sh)")
        for output in self.get_installed_files():
            if re_bin.findall(output):
                continue

            if os.path.isdir(output):
                os.chmod(output, S_IRWXU | \
                                 S_IRGRP | \
                                 S_IXGRP | \
                                 S_IROTH | \
                                 S_IXOTH)
            else:
                os.chmod(output, S_IRUSR | \
                                 S_IWUSR | \
                                 S_IRGRP | \
                                 S_IROTH)


    def fix_paths(self):
        """Replace some hardcoded paths to match where files were installed."""
        interesting_paths = {"CONFIG_DIR": os.path.join(self.saved_prefix, config_dir),
                             "DOCS_DIR": os.path.join(self.saved_prefix, docs_dir),
                             "LOCALE_DIR": os.path.join(self.saved_prefix, locale_dir),
                             "MISC_DIR": os.path.join(self.saved_prefix, misc_dir),
                             "PIXMAPS_DIR": os.path.join(self.saved_prefix, pixmaps_dir)}

        # Find and read the Paths.py file.
        pcontent = ""
        paths_file = os.path.join("zenmapCore", "Paths.py")
        installed_files = self.get_outputs()
        for f in installed_files:
            if re.findall("(%s)" % re.escape(paths_file), f):
                paths_file = f
                pf = open(paths_file)
                pcontent = pf.read()
                pf.close()
                break

        # Replace the path definitions.
        for path, replacement in interesting_paths.items():
            pcontent = re.sub("%s\s+=\s+.+" % path,
                              "%s = %s" % (path, repr(replacement)),
                              pcontent)

        # Write the modified file.
        pf = open(paths_file, "w")
        pf.write(pcontent)
        pf.close()

        # Rewrite the zenmap.desktop and zenmap-root.desktop files to point to
        # the installed locations of the su-to-zenmap.sh script and application
        # icon.
        su_filename = os.path.join(self.saved_prefix, data_dir, "su-to-zenmap.sh")
        icon_filename = os.path.join(self.saved_prefix, pixmaps_dir, "zenmap.png")

        desktop_filename = None
        root_desktop_filename = None
        for f in installed_files:
            if re.search("%s$" % re.escape("zenmap-root.desktop"), f):
                root_desktop_filename = f
            elif re.search("%s$" % re.escape("zenmap.desktop"), f):
                desktop_filename = f

        if desktop_filename is not None:
            df = open(desktop_filename, "r")
            dcontent = df.read()
            df.close()
            regex = re.compile("^(Icon *= *).*$", re.MULTILINE)
            dcontent = regex.sub("\\1%s" % icon_filename, dcontent)
            df = open(desktop_filename, "w")
            df.write(dcontent)
            df.close()

        if root_desktop_filename is not None:
            df = open(root_desktop_filename, "r")
            dcontent = df.read()
            df.close()
            regex = re.compile("^((?:Exec|TryExec) *= *).*su-to-zenmap.sh(.*)$", re.MULTILINE)
            dcontent = regex.sub("\\1%s\\2" % su_filename, dcontent)
            regex = re.compile("^(Icon *= *).*$", re.MULTILINE)
            dcontent = regex.sub("\\1%s" % icon_filename, dcontent)
            df = open(root_desktop_filename, "w")
            df.write(dcontent)
            df.close()

    def write_installed_files(self):
        """Write a list of installed files for use by the uninstall command.
        This is similar to what happens with the --record option except that it
        doesn't strip off the installation root, if any. File names containing
        newline characters are not handled."""
        if INSTALLED_FILES_NAME == self.record:
            distutils.log.warn("warning: installation record is overwriting --record file '%s'." % self.record)
        f = open(INSTALLED_FILES_NAME, "w")
        try:
            for output in self.get_installed_files():
                assert "\n" not in output
                print >> f, output
        finally:
            f.close()

00434 class my_uninstall(Command):
    """A distutils command that performs uninstallation. It reads the list of
    installed files written by the install command."""

    command_name = "uninstall"
    description = "uninstall installed files recorded in '%s'" % INSTALLED_FILES_NAME
    user_options = []

    def initialize_options(self):
        pass

    def finalize_options(self):
        pass

    def run(self):
        # Read the list of installed files.
        try:
            f = open(INSTALLED_FILES_NAME, "r")
        except IOError, e:
            if e.errno == errno.ENOENT:
                log.error("Couldn't open the installation record '%s'. Have you installed yet?" % INSTALLED_FILES_NAME)
                return
        installed_files = [file.rstrip("\n") for file in f.readlines()]
        f.close()
        # Delete the installation record too.
        installed_files.append(INSTALLED_FILES_NAME)
        # Split the list into lists of files and directories.
        files = []
        dirs = []
        for path in installed_files:
            if os.path.isfile(path) or os.path.islink(path):
                files.append(path)
            elif os.path.isdir(path):
                dirs.append(path)
        # Delete the files.
        for file in files:
            log.info("Removing '%s'." % file)
            try:
                if not self.dry_run:
                    os.remove(file)
            except OSError, e:
                log.error(str(e))
        # Delete the directories. First reverse-sort the normalized paths by
        # length so that child directories are deleted before their parents.
        dirs = [os.path.normpath(dir) for dir in dirs]
        dirs.sort(key = len, reverse = True)
        for dir in dirs:
            try:
                log.info("Removing the directory '%s'." % dir)
                if not self.dry_run:
                    os.rmdir(dir)
            except OSError, e:
                if e.errno == errno.ENOTEMPTY:
                    log.info("Directory '%s' not empty; not removing." % dir)
                else:
                    log.error(str(e))

# setup can be called in different ways depending on what we're doing. (For
# example py2exe needs special handling.) These arguments are common between all
# the operations.
COMMON_SETUP_ARGS = {
    'name': APP_NAME,
    'license': 'Nmap License (http://nmap.org/book/man-legal.html)',
    'url': APP_WEB_SITE,
    'download_url': APP_DOWNLOAD_SITE,
    'author': 'Nmap Project',
    'maintainer': 'Nmap Project',
    'description': "%s frontend and results viewer" % NMAP_DISPLAY_NAME,
    'long_description': """\
%s is an %s frontend \
that is really useful for advanced users and easy to be used by newbies.""" \
% (APP_DISPLAY_NAME, NMAP_DISPLAY_NAME),
    'version': VERSION,
    'scripts': [APP_NAME],
    'packages': ['zenmapCore', 'zenmapGUI', 'zenmapGUI.higwidgets',
                 'radialnet', 'radialnet.bestwidgets', 'radialnet.core', 'radialnet.gui', 'radialnet.util'],
    'data_files': data_files,
}

# All of the arguments to setup are collected in setup_args.
setup_args = {}
setup_args.update(COMMON_SETUP_ARGS)

if 'py2exe' in sys.argv:
    # Windows- and py2exe-specific args.
    import py2exe

    WINDOWS_SETUP_ARGS = {
        'zipfile': 'py2exe/library.zip',
        'name': APP_NAME,
        'windows': [{"script": APP_NAME,
                     "icon_resources": [(1, "install_scripts/windows/nmap-eye.ico")]}],
        # On Windows we build Ndiff here in Zenmap's setup.py so the two Python
        # programs will share a common runtime.
        'console': [{"script": "../ndiff/ndiff", "description": "Nmap scan comparison tool"}],
        'options': {"py2exe": {
            "compressed": 1,
            "optimize":2,
            "packages":"encodings",
            "includes" : "\
pango,\
atk,\
gobject,\
pickle,\
bz2,\
encodings,\
encodings.*,\
cairo,\
pangocairo,\
atk\
"}}
    }

    setup_args.update(WINDOWS_SETUP_ARGS)
elif 'py2app' in sys.argv:
    # Args for Mac OS X and py2app.
    import py2app
    import shutil

    # py2app requires a ".py" suffix.
    extended_app_name = APP_NAME + ".py"
    shutil.copyfile(APP_NAME, extended_app_name)

    MACOSX_SETUP_ARGS = {
        'app': [extended_app_name],
        'options': {"py2app": {
            "packages": ["gio", "gobject", "gtk", "cairo"],
            "includes": ["atk", "pango", "pangocairo"],
            "argv_emulation": True,
            "compressed": True,
            "plist": "install_scripts/macosx/Info.plist",
            "iconfile": "install_scripts/macosx/zenmap.icns"
        }}
    }

    setup_args.update(MACOSX_SETUP_ARGS)
else:
    # Default args.
    DEFAULT_SETUP_ARGS = {
        'cmdclass': {'install': my_install, 'uninstall': my_uninstall},
    }
    setup_args.update(DEFAULT_SETUP_ARGS)

    data_files = [
        (desktop_dir, glob('install_scripts/unix/*.desktop')),
        (data_dir, ['install_scripts/unix/su-to-zenmap.sh'])
    ]
    setup_args["data_files"].extend(data_files)

setup(**setup_args)

Generated by  Doxygen 1.6.0   Back to index