Logo Search packages:      
Sourcecode: nmap version File versions  Download package

targets.cc

/***************************************************************************
 * targets.cc -- Functions relating to "ping scanning" as well as          *
 * determining the exact IPs to hit based on CIDR and other input          *
 * formats.                                                                *
 *                                                                         *
 ***********************IMPORTANT NMAP LICENSE TERMS************************
 *                                                                         *
 * The Nmap Security Scanner is (C) 1996-2008 Insecure.Com LLC. Nmap is    *
 * also a registered trademark of Insecure.Com LLC.  This program is free  *
 * software; you may redistribute and/or modify it under the terms of the  *
 * GNU General Public License as published by the Free Software            *
 * Foundation; Version 2 with the clarifications and exceptions described  *
 * below.  This guarantees your right to use, modify, and redistribute     *
 * this software under certain conditions.  If you wish to embed Nmap      *
 * technology into proprietary software, we sell alternative licenses      *
 * (contact sales@insecure.com).  Dozens of software vendors already       *
 * license Nmap technology such as host discovery, port scanning, OS       *
 * detection, and version detection.                                       *
 *                                                                         *
 * Note that the GPL places important restrictions on "derived works", yet *
 * it does not provide a detailed definition of that term.  To avoid       *
 * misunderstandings, we consider an application to constitute a           *
 * "derivative work" for the purpose of this license if it does any of the *
 * following:                                                              *
 * o Integrates source code from Nmap                                      *
 * o Reads or includes Nmap copyrighted data files, such as                *
 *   nmap-os-fingerprints or nmap-service-probes.                          *
 * o Executes Nmap and parses the results (as opposed to typical shell or  *
 *   execution-menu apps, which simply display raw Nmap output and so are  *
 *   not derivative works.)                                                * 
 * o Integrates/includes/aggregates Nmap into a proprietary executable     *
 *   installer, such as those produced by InstallShield.                   *
 * o Links to a library or executes a program that does any of the above   *
 *                                                                         *
 * The term "Nmap" should be taken to also include any portions or derived *
 * works of Nmap.  This list is not exclusive, but is just meant to        *
 * clarify our interpretation of derived works with some common examples.  *
 * These restrictions only apply when you actually redistribute Nmap.  For *
 * example, nothing stops you from writing and selling a proprietary       *
 * front-end to Nmap.  Just distribute it by itself, and point people to   *
 * http://insecure.org/nmap/ to download Nmap.                             *
 *                                                                         *
 * We don't consider these to be added restrictions on top of the GPL, but *
 * just a clarification of how we interpret "derived works" as it applies  *
 * to our GPL-licensed Nmap product.  This is similar to the way Linus     *
 * Torvalds has announced his interpretation of how "derived works"        *
 * applies to Linux kernel modules.  Our interpretation refers only to     *
 * Nmap - we don't speak for any other GPL products.                       *
 *                                                                         *
 * If you have any questions about the GPL licensing restrictions on using *
 * Nmap in non-GPL works, we would be happy to help.  As mentioned above,  *
 * we also offer alternative license to integrate Nmap into proprietary    *
 * applications and appliances.  These contracts have been sold to dozens  *
 * of software vendors, and generally include a perpetual license as well  *
 * as providing for priority support and updates as well as helping to     *
 * fund the continued development of Nmap technology.  Please email        *
 * sales@insecure.com for further information.                             *
 *                                                                         *
 * As a special exception to the GPL terms, Insecure.Com LLC grants        *
 * permission to link the code of this program with any version of the     *
 * OpenSSL library which is distributed under a license identical to that  *
 * listed in the included Copying.OpenSSL file, and distribute linked      *
 * combinations including the two. You must obey the GNU GPL in all        *
 * respects for all of the code used other than OpenSSL.  If you modify    *
 * this file, you may extend this exception to your version of the file,   *
 * but you are not obligated to do so.                                     *
 *                                                                         *
 * If you received these files with a written license agreement or         *
 * contract stating terms other than the terms above, then that            *
 * alternative license agreement takes precedence over these comments.     *
 *                                                                         *
 * Source is provided to this software because we believe users have a     *
 * right to know exactly what a program is going to do before they run it. *
 * This also allows you to audit the software for security holes (none     *
 * have been found so far).                                                *
 *                                                                         *
 * Source code also allows you to port Nmap to new platforms, fix bugs,    *
 * and add new features.  You are highly encouraged to send your changes   *
 * to fyodor@insecure.org for possible incorporation into the main         *
 * distribution.  By sending these changes to Fyodor or one the            *
 * Insecure.Org development mailing lists, it is assumed that you are      *
 * offering Fyodor and Insecure.Com LLC the unlimited, non-exclusive right *
 * to reuse, modify, and relicense the code.  Nmap will always be          *
 * available Open Source, but this is important because the inability to   *
 * relicense code has caused devastating problems for other Free Software  *
 * projects (such as KDE and NASM).  We also occasionally relicense the    *
 * code to third parties as discussed above.  If you wish to specify       *
 * special license conditions of your contributions, just say so when you  *
 * send them.                                                              *
 *                                                                         *
 * This program is distributed in the hope that it will be useful, but     *
 * WITHOUT ANY WARRANTY; without even the implied warranty of              *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       *
 * General Public License for more details at                              *
 * http://www.gnu.org/copyleft/gpl.html , or in the COPYING file included  *
 * with Nmap.                                                              *
 *                                                                         *
 ***************************************************************************/

/* $Id: targets.cc 6633 2007-12-22 06:32:03Z fyodor $ */


#include "targets.h"
#include "timing.h"
#include "NmapOps.h"
#include "TargetGroup.h"
#include "Target.h"
#include "scan_engine.h"
#include "nmap_dns.h"
#include "nmap_tty.h"
#include "utils.h"

using namespace std;
extern NmapOps o;
enum pingstyle { pingstyle_unknown, pingstyle_rawtcp, pingstyle_rawudp, pingstyle_connecttcp, 
             pingstyle_icmp };

/* Gets the host number (index) of target in the hostbatch array of
 pointers.  Note that the target MUST EXIST in the array or all
 heck will break loose. */
static inline int gethostnum(Target *hostbatch[], Target *target) {
  int i = 0;
  do {
    if (hostbatch[i] == target)
      return i;
  } while(++i);

  fatal("fluxx0red");
  return 0; // Unreached
}

char *readhoststate(int state) {
  switch(state) {
  case HOST_UP:
    return "HOST_UP";
  case HOST_DOWN:
    return "HOST_DOWN";
  case HOST_FIREWALLED:
    return "HOST_FIREWALLED";
  default:
    return "UNKNOWN/COMBO";
  }
  return NULL;
}

/* Conducts an ARP ping sweep of the given hosts to determine which ones
   are up on a local ethernet network */
static void arpping(Target *hostbatch[], int num_hosts) {
  /* First I change hostbatch into a vector<Target *>, which is what ultra_scan
     takes.  I remove hosts that cannot be ARP scanned (such as localhost) */
  vector<Target *> targets;
  int targetno;
  targets.reserve(num_hosts);

  for(targetno = 0; targetno < num_hosts; targetno++) {
    initialize_timeout_info(&hostbatch[targetno]->to);
    /* Default timout should be much lower for arp */
    hostbatch[targetno]->to.timeout = MIN(o.initialRttTimeout(), 100) * 1000;
    if (!hostbatch[targetno]->SrcMACAddress()) {
      bool islocal = islocalhost(hostbatch[targetno]->v4hostip());
      if (islocal) {
      log_write(LOG_STDOUT|LOG_NORMAL, 
              "ARP ping: Considering %s UP because it is a local IP, despite no MAC address for device %s\n",
              hostbatch[targetno]->NameIP(), hostbatch[targetno]->deviceName());
      hostbatch[targetno]->flags &= ~(HOST_DOWN|HOST_FIREWALLED);
      hostbatch[targetno]->flags |= HOST_UP;
      } else {
      log_write(LOG_STDOUT|LOG_NORMAL, 
              "ARP ping: Considering %s DOWN because no MAC address found for device %s.\n",
              hostbatch[targetno]->NameIP(), 
              hostbatch[targetno]->deviceName());
      hostbatch[targetno]->flags &= ~HOST_FIREWALLED;
      hostbatch[targetno]->flags |= HOST_DOWN;
      }
      continue;
    }
    targets.push_back(hostbatch[targetno]);
  }
  if (!targets.empty())
    ultra_scan(targets, NULL, PING_SCAN_ARP);
  return;
}

static void hoststructfry(Target *hostbatch[], int nelem) {
  genfry((unsigned char *)hostbatch, sizeof(Target *), nelem);
  return;
}

/* Returns the last host obtained by nexthost.  It will be given again the next
   time you call nexthost(). */
void returnhost(HostGroupState *hs) {
  assert(hs->next_batch_no > 0);
  hs->next_batch_no--;
}

/* Is the host passed as Target to be excluded, much of this logic had  (mdmcl)
 * to be rewritten from wam's original code to allow for the objects */
static int hostInExclude(struct sockaddr *checksock, size_t checksocklen, 
              TargetGroup *exclude_group) {
  unsigned long tmpTarget; /* ip we examine */
  int i=0;                 /* a simple index */
  char targets_type;       /* what is the address type of the Target Group */
  struct sockaddr_storage ss; 
  struct sockaddr_in *sin = (struct sockaddr_in *) &ss;
  size_t slen;             /* needed for funct but not used */
  unsigned long mask = 0;  /* our trusty netmask, which we convert to nbo */
  struct sockaddr_in *checkhost;

  if ((TargetGroup *)0 == exclude_group)
    return 0;

  assert(checksocklen >= sizeof(struct sockaddr_in));
  checkhost = (struct sockaddr_in *) checksock;
  if (checkhost->sin_family != AF_INET)
    checkhost = NULL;

  /* First find out what type of addresses are in the target group */
  targets_type = exclude_group[i].get_targets_type();

  /* Lets go through the targets until we reach our uninitialized placeholder */
  while (exclude_group[i].get_targets_type() != TargetGroup::TYPE_NONE)
  { 
    /* while there are still hosts in the target group */
    while (exclude_group[i].get_next_host(&ss, &slen) == 0) {
      tmpTarget = sin->sin_addr.s_addr; 

      /* For Netmasks simply compare the network bits and move to the next
       * group if it does not compare, we don't care about the individual addrs */
      if (targets_type == TargetGroup::IPV4_NETMASK) {
        mask = htonl((unsigned long) (0-1) << 32-exclude_group[i].get_mask());
        if ((tmpTarget & mask) == (checkhost->sin_addr.s_addr & mask)) {
        exclude_group[i].rewind();
        return 1;
        }
      else {
        break;
      }
      } 
      /* For ranges we need to be a little more slick, if we don't find a match
       * we should skip the rest of the addrs in the octet, thank wam for this
       * optimization */
      else if (targets_type == TargetGroup::IPV4_RANGES) {
        if (tmpTarget == checkhost->sin_addr.s_addr) {
          exclude_group[i].rewind();
          return 1;
        }
        else { /* note these are in network byte order */
        if ((tmpTarget & 0x000000ff) != (checkhost->sin_addr.s_addr & 0x000000ff))
            exclude_group[i].skip_range(TargetGroup::FIRST_OCTET); 
        else if ((tmpTarget & 0x0000ff00) != (checkhost->sin_addr.s_addr & 0x0000ff00))
            exclude_group[i].skip_range(TargetGroup::SECOND_OCTET); 
        else if ((tmpTarget & 0x00ff0000) != (checkhost->sin_addr.s_addr & 0x00ff0000))
            exclude_group[i].skip_range(TargetGroup::THIRD_OCTET); 

          continue;
        }
      }
#if HAVE_IPV6
      else if (targets_type == TargetGroup::IPV6_ADDRESS) {
        fatal("exclude file not supported for IPV6 -- If it is important to you, send a mail to fyodor@insecure.org so I can guage support\n");
      }
#endif
    }
    exclude_group[i++].rewind();
  }

  /* we did not find the host */
  return 0;
}

/* loads an exclude file into an exclude target list  (mdmcl) */
TargetGroup* load_exclude(FILE *fExclude, char *szExclude) {
  int i=0;              /* loop counter */
  int iLine=0;                /* line count */
  int iListSz=0;        /* size of our exclude target list. 
                         * It doubles in size as it gets
                         *  close to filling up
                         */
  char acBuf[512];
  char *p_acBuf;
  TargetGroup *excludelist;   /* list of ptrs to excluded targets */
  char *pc;             /* the split out exclude expressions */
  char b_file = (char)0;        /* flag to indicate if we are using a file */

  /* If there are no params return now with a NULL list */
  if (((FILE *)0 == fExclude) && ((char *)0 == szExclude)) {
    excludelist=NULL;
    return excludelist;
  }

  if ((FILE *)0 != fExclude)
    b_file = (char)1;

  /* Since I don't know of a realloc equiv in C++, we will just count
   * the number of elements here. */

  /* If the input was given to us in a file, count the number of elements
   * in the file, and reset the file */
  if (1 == b_file) {
    while ((char *)0 != fgets(acBuf,sizeof(acBuf), fExclude)) {
      if ((char *)0 == strchr(acBuf, '\n')) {
        fatal("Exclude file line %d was too long to read.  Exiting.", iLine);
      }
      pc=strtok(acBuf, "\t\n ");    
      while (NULL != pc) {
        iListSz++;
        pc=strtok(NULL, "\t\n ");
      }
    }
    rewind(fExclude);
  } /* If the exclude file was provided via command line, count the elements here */
  else {
    p_acBuf=strdup(szExclude);
    pc=strtok(p_acBuf, ",");
    while (NULL != pc) {
      iListSz++;
      pc=strtok(NULL, ",");
    }
    free(p_acBuf);
    p_acBuf = NULL;
  }

  /* allocate enough TargetGroups to cover our entries, plus one that
   * remains uninitialized so we know we reached the end */
  excludelist = new TargetGroup[iListSz + 1];

  /* don't use a for loop since the counter isn't incremented if the 
   * exclude entry isn't parsed
   */
  i=0;
  if (1 == b_file) {
    /* If we are parsing a file load the exclude list from that */
    while ((char *)0 != fgets(acBuf, sizeof(acBuf), fExclude)) {
      ++iLine;
      if ((char *)0 == strchr(acBuf, '\n')) {
        fatal("Exclude file line %d was too long to read.  Exiting.", iLine);
      }
  
      pc=strtok(acBuf, "\t\n ");    
  
      while ((char *)0 != pc) {
         if(excludelist[i].parse_expr(pc,o.af()) == 0) {
           if (o.debugging > 1)
             error("Loaded exclude target of: %s", pc);
           ++i;
         } 
         pc=strtok(NULL, "\t\n ");
      }
    }
  }
  else {
    /* If we are parsing command line, load the exclude file from the string */
    p_acBuf=strdup(szExclude);
    pc=strtok(p_acBuf, ",");

    while (NULL != pc) {
      if(excludelist[i].parse_expr(pc,o.af()) == 0) {
        if (o.debugging >1)
          error("Loaded exclude target of: %s", pc);
        ++i;
      } 

      /* This is a totally cheezy hack, but since I can't use strtok_r...
       * If you can think of a better way to do this, feel free to change.
       * As for now, we will reset strtok each time we leave parse_expr */
      {
      int hack_i;
      char *hack_c = strdup(szExclude);

      pc=strtok(hack_c, ",");

        for (hack_i = 0; hack_i < i; hack_i++) 
          pc=strtok(NULL, ",");

      free(hack_c);
      }
    } 
  }
  return excludelist;
}

/* A debug routine to dump some information to stdout.                  (mdmcl)
 * Invoked if debugging is set to 3 or higher
 * I had to make signigicant changes from wam's code. Although wam
 * displayed much more detail, alot of this is now hidden inside
 * of the Target Group Object. Rather than writing a bunch of methods
 * to return private attributes, which would only be used for 
 * debugging, I went for the method below.
 */
int dumpExclude(TargetGroup *exclude_group) {
  int i=0, debug_save=0, type=TargetGroup::TYPE_NONE;
  unsigned int mask = 0;
  struct sockaddr_storage ss;
  struct sockaddr_in *sin = (struct sockaddr_in *) &ss;
  size_t slen;

  /* shut off debugging for now, this is a debug routine in itself,
   * we don't want to see all the debug messages inside of the object */
  debug_save = o.debugging;
  o.debugging = 0;

  while ((type = exclude_group[i].get_targets_type()) != TargetGroup::TYPE_NONE)
  {
    switch (type) {
       case TargetGroup::IPV4_NETMASK:
         exclude_group[i].get_next_host(&ss, &slen);
         mask = exclude_group[i].get_mask();
         error("exclude host group %d is %s/%d", i, inet_ntoa(sin->sin_addr), mask);
         break;

       case TargetGroup::IPV4_RANGES:
         while (exclude_group[i].get_next_host(&ss, &slen) == 0) 
           error("exclude host group %d is %s", i, inet_ntoa(sin->sin_addr));
         break;

       case TargetGroup::IPV6_ADDRESS:
       fatal("IPV6 addresses are not supported in the exclude file\n");
         break;

       default:
       fatal("Unknown target type in exclude file.\n");
    }
    exclude_group[i++].rewind();
  }

  /* return debugging to what it was */
  o.debugging = debug_save; 
  return 1;
}
 
static void massping(Target *hostbatch[], int num_hosts, int pingtype) {
  static struct timeout_info group_to = { 0, 0, 0 };
  static char prev_device_name[16] = "";
  const char *device_name;
  std::vector<Target *> targets;
  int i;

  /* Get the name of the interface used to send to this group. We assume the
     device used to send to the first target is used to send to all of them. */
  device_name = NULL;
  if (num_hosts > 0)
    device_name = hostbatch[0]->deviceName();
  if (device_name == NULL)
    device_name = "";

  /* group_to is a static variable that keeps track of group timeout values
     between invocations of this function. We reuse timeouts as long as this
     invocation uses the same device as the previous one. Otherwise we
     reinitialize the timeouts. */
  if (group_to.srtt == 0 || group_to.rttvar == 0 || group_to.timeout == 0
    || strcmp(prev_device_name, device_name) != 0) {
    initialize_timeout_info(&group_to);
    Strncpy(prev_device_name, device_name, sizeof(prev_device_name));
  }

  for (i = 0; i < num_hosts; i++) {
    initialize_timeout_info(&hostbatch[i]->to);
    targets.push_back(hostbatch[i]);
  }

  /* ultra_scan gets pingtype from o.pingtype. */
  ultra_scan(targets, NULL, PING_SCAN, &group_to);
}

Target *nexthost(HostGroupState *hs, TargetGroup *exclude_group,
                      struct scan_lists *ports, int pingtype) {
int hidx = 0;
int i;
struct sockaddr_storage ss;
size_t sslen;
struct intf_entry *ifentry;
 u32 ifbuf[200] ;
 struct route_nfo rnfo;
 bool arpping_done = false;
 struct timeval now;

 ifentry = (struct intf_entry *) ifbuf; 
 ifentry->intf_len = sizeof(ifbuf); // TODO: May want to use a larger buffer if interface aliases prove important.
if (hs->next_batch_no < hs->current_batch_sz) {
  /* Woop!  This is easy -- we just pass back the next host struct */
  return hs->hostbatch[hs->next_batch_no++];
}
/* Doh, we need to refresh our array */
/* for(i=0; i < hs->max_batch_sz; i++) hs->hostbatch[i] = new Target(); */

hs->current_batch_sz = hs->next_batch_no = 0;
do {
  /* Grab anything we have in our current_expression */
  while (hs->current_batch_sz < hs->max_batch_sz && 
       hs->current_expression.get_next_host(&ss, &sslen) == 0)
    {
      if (hostInExclude((struct sockaddr *)&ss, sslen, exclude_group)) {
      continue; /* Skip any hosts the user asked to exclude */
      }
      hidx = hs->current_batch_sz;
      hs->hostbatch[hidx] = new Target();
      hs->hostbatch[hidx]->setTargetSockAddr(&ss, sslen);

      /* We figure out the source IP/device IFF
       1) We are r00t AND
       2) We are doing tcp or udp pingscan OR
       3) We are doing a raw-mode portscan or osscan OR
       4) We are on windows and doing ICMP ping */
      if (o.isr00t && o.af() == AF_INET && 
        ((pingtype & (PINGTYPE_TCP|PINGTYPE_UDP|PINGTYPE_PROTO|PINGTYPE_ARP)) || o.RawScan()
#ifdef WIN32
         || (pingtype & (PINGTYPE_ICMP_PING|PINGTYPE_ICMP_MASK|PINGTYPE_ICMP_TS))
#endif // WIN32
         )) {
      hs->hostbatch[hidx]->TargetSockAddr(&ss, &sslen);
      if (!route_dst(&ss, &rnfo)) {
        fatal("%s: failed to determine route to %s", __func__, hs->hostbatch[hidx]->NameIP());
      }
      if (rnfo.direct_connect) {
        hs->hostbatch[hidx]->setDirectlyConnected(true);
      } else {
        hs->hostbatch[hidx]->setDirectlyConnected(false);
        hs->hostbatch[hidx]->setNextHop(&rnfo.nexthop, 
                                sizeof(rnfo.nexthop));
      }
      hs->hostbatch[hidx]->setIfType(rnfo.ii.device_type);
      if (rnfo.ii.device_type == devt_ethernet) {
        if (o.spoofMACAddress())
          hs->hostbatch[hidx]->setSrcMACAddress(o.spoofMACAddress());
        else hs->hostbatch[hidx]->setSrcMACAddress(rnfo.ii.mac);
      }
      hs->hostbatch[hidx]->setSourceSockAddr(&rnfo.srcaddr, sizeof(rnfo.srcaddr));
      if (hidx == 0) /* Because later ones can have different src addy and be cut off group */
        o.decoys[o.decoyturn] = hs->hostbatch[hidx]->v4source();
      hs->hostbatch[hidx]->setDeviceNames(rnfo.ii.devname, rnfo.ii.devfullname);
      //      printf("Target %s %s directly connected, goes through local iface %s, which %s ethernet\n", hs->hostbatch[hidx]->NameIP(), hs->hostbatch[hidx]->directlyConnected()? "IS" : "IS NOT", hs->hostbatch[hidx]->deviceName(), (hs->hostbatch[hidx]->ifType() == devt_ethernet)? "IS" : "IS NOT");
      }
      

      /* In some cases, we can only allow hosts that use the same
       device in a group.  Similarly, we don't mix
       directly-connected boxes with those that aren't */
      if (o.af() == AF_INET && o.isr00t && hidx > 0 && 
        hs->hostbatch[hidx]->deviceName() && 
        (hs->hostbatch[hidx]->v4source().s_addr != hs->hostbatch[0]->v4source().s_addr || 
         strcmp(hs->hostbatch[0]->deviceName(), 
              hs->hostbatch[hidx]->deviceName()) != 0 
        || hs->hostbatch[hidx]->directlyConnected() != hs->hostbatch[0]->directlyConnected())) {
      /* Cancel everything!  This guy must go in the next group and we are
         out of here */
      hs->current_expression.return_last_host();
      delete hs->hostbatch[hidx];
      goto batchfull;
      }
      hs->current_batch_sz++;
}

  if (hs->current_batch_sz < hs->max_batch_sz &&
      hs->next_expression < hs->num_expressions) {
    /* We are going to have to pop in another expression. */
    while(hs->current_expression.parse_expr(hs->target_expressions[hs->next_expression++], o.af()) != 0) 
      if (hs->next_expression >= hs->num_expressions)
      break;
  } else break;
} while(1);

 batchfull:
 
if (hs->current_batch_sz == 0)
  return NULL;

/* OK, now we have our complete batch of entries.  The next step is to
   randomize them (if requested) */
if (hs->randomize) {
  hoststructfry(hs->hostbatch, hs->current_batch_sz);
}

/* First I'll do the ARP ping if all of the machines in the group are
   directly connected over ethernet.  I may need the MAC addresses
   later anyway. */
 if (hs->hostbatch[0]->ifType() == devt_ethernet && 
     hs->hostbatch[0]->directlyConnected() && 
     o.sendpref != PACKET_SEND_IP_STRONG) {
   arpping(hs->hostbatch, hs->current_batch_sz);
   arpping_done = true;
 }
 
 gettimeofday(&now, NULL);
 if ((o.sendpref & PACKET_SEND_ETH) && 
     hs->hostbatch[0]->ifType() == devt_ethernet) {
   for(i=0; i < hs->current_batch_sz; i++)
     if (!(hs->hostbatch[i]->flags & HOST_DOWN) && 
       !hs->hostbatch[i]->timedOut(&now))
       if (!setTargetNextHopMAC(hs->hostbatch[i]))
       fatal("%s: Failed to determine dst MAC address for target %s", 
             __func__, hs->hostbatch[i]->NameIP());
 }

 /* TODO: Maybe I should allow real ping scan of directly connected
    ethernet hosts? */
 /* Then we do the mass ping (if required - IP-level pings) */
 if ((pingtype == PINGTYPE_NONE && !arpping_done) || hs->hostbatch[0]->ifType() == devt_loopback) {
   for(i=0; i < hs->current_batch_sz; i++)  {
     if (!hs->hostbatch[i]->timedOut(&now)) {
       initialize_timeout_info(&hs->hostbatch[i]->to);
       hs->hostbatch[i]->flags |= HOST_UP; /*hostbatch[i].up = 1;*/
         hs->hostbatch[i]->reason.reason_id = ER_LOCALHOST;
     }
   }
 } else if (!arpping_done)
   if (pingtype & PINGTYPE_ARP) /* A host that we can't arp scan ... maybe localhost */
     massping(hs->hostbatch, hs->current_batch_sz, DEFAULT_PING_TYPES);
   else
     massping(hs->hostbatch, hs->current_batch_sz, pingtype);
 
 if (!o.noresolve) nmap_mass_rdns(hs->hostbatch, hs->current_batch_sz);
 
 return hs->hostbatch[hs->next_batch_no++];
}

Generated by  Doxygen 1.6.0   Back to index